Image
image
image
image


Product News

Highest Accuracy Isolated Sigma-Delta Modulator Increases Efficiency of Motor Drives and Power Inverters

AD7403 isolated sigma-delta modulator achieves industry’s highest accuracy current and voltage measurement.

NORWOOD, Mass.--(BUSINESS WIRE) -- Analog Devices, Inc. introduced today the industry’s highest accuracy isolated sigma-delta modulator for precision current and voltage measurement in DC/AC power conversion applications. The AD7403 isolated sigma-delta modulator achieves an 81-dB signal-to-noise and distortion ratio (SINAD) (min) @ 78 KSPS over a -40C° to +125C° temperature range, which is 11 dB higher than competing devices. The higher SINAD enables more accurate current and voltage measurement which improves the performance of motor drives by reducing torque ripple on the motor shaft. The higher SINAD also increases the power transfer efficiency in DC/AC power inverter applications, such as motor drives, solar and wind inverters.

Learn more about ADI’s motor and power control solutions:
http://motorcontrol.analog.com/en/segment/mc.html

AD7403 Sigma-Delta Modulator Integrates ADI’s iCoupler Digital Isolation Technology

The AD7403 isolated sigma-delta modulator integrates ADI’s iCoupler digital isolation technology, creating a single-chip solution for measuring the voltage across a shunt resistor by converting an analog signal into a 1-bit data stream that can be clocked at up to 20 MHz. The increased isolation working voltage (1250 V peak) allows designers to replace less accurate, more costly Hall Effect sensors in higher DC-bus voltage power conversion and motor drive applications.

The higher performance of the isolated sigma-delta modulator enables the use of a smaller shunt resistor, which reduces thermal loss across the shunt while retaining measurement accuracy.

AD7403 Isolated Sigma-Delta Modulator Key Features

  • 5-MHz to 20-MHz external clock input rate
  • 16 bits, no missing codes
  • Typical offset drift: 1.5 μV/°C
  • On-board digital isolator
  • On-board reference
  • True bipolar analog input range: ±320 mV
  • High common-mode transient immunity: >25 kV/μs

Pricing and Availability

Product       Volume Availability       Price Each per 10,000       PackageAnalog Devices, Inc. Corporate Communications Department, Three Technology Way, Norwood, MA 02062












 

AD7403




Now


$2.95


16-lead, wide body SOIC

(8.3mm creepage and clearance)

The AD7403 modulator is well suited to work with other ADI products designed for motor control and power conversion systems, including the ADSP-CM40x mixed-signal control processor, ADuM6000 isolated, 5-kV, DC/DC converter and the ADP2441 36-V, 1-A synchronous step-down DC/DC regulator.



Bookmark and Share



Insert your comment

Author Name(required):

Author Web Site:

Author email address(required):

Comment(required):

Please Introduce Secure Code:

image

image
image